Electronic Calibration and Repair
Fox Valley Metrology and Twin Pines Metrology, divisions of WESTport Corporation are able to offer its customers complete repair and calibration services on nearly all makes and models of electronic test and measurement equipment. Most calibration services can be performed in our lab or at your facility. We allocate personnel to handle solely equipment repairs and calibration. This provides us with the ability to lower our costs while generating faster turnaround time on our services. Our primary ISO/IEC 17025 standards laboratory provides the resources you need for the traceability for all of your lab standards. All repairs are quoted prior to completion, and will not exceed 50% of the cost of a replacement.
All technicians are supplied with laptop computers and portable printers for any on site requests. Also, technicians are equipped with DoDMIDAS and GIDEP CD-ROMS, which contain all military and some civilian calibration procedures. This enables the customer to receive accurate certifications and calibration labels at the time the job is completed. Most of Fox Valley Metrology's electronic calibration technicians have been trained in the military with years of extensive calibration and repair experience.
| Electronic Calibration and Repair | ||||
|---|---|---|---|---|
| Accelerometer | Durometers | Load Cells | Roundness Testers | Thermal Couple/RTD |
| Air Gages | ESD Floors and Mats | Logic Analyzer | Scales/Balances | Thermometers & Temp Controllers |
| Ammeters | Film Thickness Gages | Manometers | Shadowgraph Comparators | Torque Calibrators |
| Analog Volt, Ohm & Amp Meters | Flow Gages (Air) | Meggers | Shunts | Torque Sensors |
| Bridges | Force Gages/Dynamometer | Megohmmeter | Signal Generators | Torque Testers/Analyzers |
| Cable Tensiometers | Frequency Counters | Microscopes | Solder Guns/Pots Irons | Torque Watches |
| Capacitance Meters | Function Generators | Multifunction Calibrator | Sound Level Meters | Torque Wrenches |
| Clamp-On Meters | Gauge Amps & Probes | Multimeter | Spectrophotometers | ULM Calibration |
| CMM’s | Gaussmeter | Optical Comparators | Spring Testers | ULM Training |
| Conductance Meters | Glass Thermometers | Oscilloscopes/Scopemeters | Standard Cells | Vacuum Gages |
| Conductivity Meters | Ground Tester | Ovens | Standards (LCR) | Variable Auto Transformers |
| Contracers | Hardness Testers | Panel Meters | Static Meters | Vibration Amp |
| Data Loggers | Hygrometers | pH Meters | Stopwatch & Timers | Viscometers |
| Deadweight Testers | Hypot Testers | Power Supplies | Strip/Chart/XY Recorders | Watt Meters |
| Decade LCR Box | Inductors | Pressure Gages (Air & Liquid) | Stroboscopes | Weights |
| Decade Resistors. | Ionizers | Profilometers | Supermicrometers | Welders |
| Digital Readouts | LCR Bridge | Rectifier | Surface Plates | Wrist/Foot Strap Testers |
| Durometer Specimen | LCR Meters | Resistivity Meter | Tachometers | Z Meters |
| Resistors | Tensile Testers | Zahn Cups | ||
Brooks 1051-5 Flow Calibrator
The Brooks Automatic Gas Calibrator is capable of measuring a selected volume of gas up to a maximum capacity of 24,000 cubic centimeters per minute. Gas flow is collected in a precision-bore glass cylinder under a mercury sealed piston.
The Brooks Automatic Gas Calibrator is capable of measuring a selected volume of gas up to a maximum capacity of 24,000 cubic centimeters per minute. Gas flow is collected in a precision-bore glass cylinder under a mercury sealed piston.
Learn more
The Brooks Automatic Gas Calibrator is capable of measuring a selected volume of gas up to a maximum capacity of 24,000 cubic centimeters per minute. Gas flow is collected in a precision-bore glass cylinder under a mercury sealed piston.
Dry Well Temperature Calibrator
The Ametek Dry Well Temperature Calibrator is ambient to 600° C/1100° F. The Calibrator is also monitored with a platinum RTD Probe.
The Ametek Dry Well Temperature Calibrator is ambient to 600° C/1100° F. The Calibrator is also monitored with a platinum RTD Probe.
Learn more
The Ametek Dry Well Temperature Calibrator is ambient to 600° C/1100° F. The Calibrator is also monitored with a platinum RTD Probe.
PS System with Local Rubidium Oscillator
The HP 58503A GPS Time and Frequency Reference Receiver maintains frequency accuracy of better than .000000000001, even in the presence of Selective Availability. This performance, combined with the unit's low cost, makes it an attractive lab alternative compared with more expensive cesium and rubidium solutions.
The HP 58503A GPS Time and Frequency Reference Receiver maintains frequency accuracy of better than .000000000001, even in the presence of Selective Availability. This performance, combined with the unit's low cost, makes it an attractive lab alternative compared with more expensive cesium and rubidium solutions.
Learn more
The HP 58503A GPS Time and Frequency Reference Receiver maintains frequency accuracy of better than .000000000001, even in the presence of Selective Availability. This performance, combined with the unit's low cost, makes it an attractive lab alternative compared with more expensive cesium and rubidium solutions.
Omega BB702 Infrared Temperature Calibrator
The BB702 Blackbody Calibrator is a high performance, rugged, portable calibrator for infrared pyrometers. The BB702 has a range from Ambient +10 to 215°C (Ambient +20 to 420°F) with an accuracy of ±0.5°C, ±0.25% rdg. The unit provides a heated target plate of known temperature and emissivity. Virtually any infrared pyrometer with a spot size diameter of 63.5 mm (2.5") or smaller can be calibrated. Both models come with an RS-232 computer interface which allows computer control of the setpoints for automatic test applications. An NIST traceable calibration certificate is also provided.
The BB702 Blackbody Calibrator is a high performance, rugged, portable calibrator for infrared pyrometers. The BB702 has a range from Ambient +10 to 215°C (Ambient +20 to 420°F) with an accuracy of ±0.5°C, ±0.25% rdg. The unit provides a heated target plate of known temperature and emissivity. Virtually any infrared pyrometer with a spot size diameter of 63.5 mm (2.5") or smaller can be calibrated. Both models come with an RS-232 computer interface which allows computer control of the setpoints for automatic test applications. An NIST traceable calibration certificate is also provided.
Learn more
The BB702 Blackbody Calibrator is a high performance, rugged, portable calibrator for infrared pyrometers. The BB702 has a range from Ambient +10 to 215°C (Ambient +20 to 420°F) with an accuracy of ±0.5°C, ±0.25% rdg. The unit provides a heated target plate of known temperature and emissivity. Virtually any infrared pyrometer with a spot size diameter of 63.5 mm (2.5") or smaller can be calibrated. Both models come with an RS-232 computer interface which allows computer control of the setpoints for automatic test applications. An NIST traceable calibration certificate is also provided.
HP 53132A Universal Counter
The Agilent 53132A universal counter has frequency resolution of 12 digits per second, 150 ps time interval resolution and a complete set of test and analysis features. The unit comes with two 225 MHz channels, and you can choose an optional third channel that measures up to 3 GHz, 5 GHz or 12.4 GHz.
The Agilent 53132A universal counter has frequency resolution of 12 digits per second, 150 ps time interval resolution and a complete set of test and analysis features. The unit comes with two 225 MHz channels, and you can choose an optional third channel that measures up to 3 GHz, 5 GHz or 12.4 GHz.
Learn more
The Agilent 53132A universal counter has frequency resolution of 12 digits per second, 150 ps time interval resolution and a complete set of test and analysis features. The unit comes with two 225 MHz channels, and you can choose an optional third channel that measures up to 3 GHz, 5 GHz or 12.4 GHz.
Fluke 5520A Multi-Product Calibrators
A turnkey solution for calibrating today’s advanced 6.5 digit bench DMMs
The Fluke 5520A builds on the 5500A's capabilities, extending its workload coverage even further. Its improved accuracy, expanded ranges, and capability to calibrate 5 1/2 and 6 1/2 digit multimeters can cover virtually all your high-performance workload, including:
A turnkey solution for calibrating today’s advanced 6.5 digit bench DMMs
The Fluke 5520A builds on the 5500A's capabilities, extending its workload coverage even further. Its improved accuracy, expanded ranges, and capability to calibrate 5 1/2 and 6 1/2 digit multimeters can cover virtually all your high-performance workload, including:
Learn more
The Fluke 5520A builds on the 5500A's capabilities, extending its workload coverage even further. Its improved accuracy, expanded ranges, and capability to calibrate 5 1/2 and 6 1/2 digit multimeters can cover virtually all your high-performance workload, including:
- Handheld and bench meters (analog and digital) up to 6 1/2 digits
- Thermocouple and RTD thermometers
- Process calibrators
- Data loggers
- Strip and chart recorders
- Watt meters
- Power harmonics analyzers
- Current clamps and clamp meters
- Analog or digital handheld and bench oscilloscopes (with options)
- Panel meters
- Graphical multimeters
- Power meters, disturbance analyzers, power quality monitors, recorders and other power quality related equipment (with option)
A turnkey solution for calibrating today’s advanced 6.5 digit bench DMMs
The Fluke 5520A builds on the 5500A's capabilities, extending its workload coverage even further. Its improved accuracy, expanded ranges, and capability to calibrate 5 1/2 and 6 1/2 digit multimeters can cover virtually all your high-performance workload, including:
- Handheld and bench meters (analog and digital) up to 6 1/2 digits
- Thermocouple and RTD thermometers
- Process calibrators
- Data loggers
- Strip and chart recorders
- Watt meters
- Power harmonics analyzers
- Current clamps and clamp meters
- Analog or digital handheld and bench oscilloscopes (with options)
- Panel meters
- Graphical multimeters
- Power meters, disturbance analyzers, power quality monitors, recorders and other power quality related equipment (with option)
